User's Manual

2
Opening & Closing Your Safe
7
Home and Office Security Safes
Important: REDUCED LEVEL OF SECURITY
The safe is ONLY FULLY LOCKED after turning key to the locked position and spinning
the dial. For your security, we recommend always locking both the combination dial
and key lock for the highest level of protection & security.
Notes
Opening The First Time
The dial is preset to the fourth (last) number in the combination.
The safe door should open when you insert the Companion
Entry Key (with the round top), turn to the right and pull the door
open. The dial may move in transit, making it necessary to dial the
combination before opening the first time We recommend
trying the following combination procedure with safe door open first.
Your Combination
The combination for your safe can be found imprinted on the inside back
cover of this manual. It is a preset 4 number sequence that is unique to your
safe and cannot be changed. It is recommended that you keep this manual in
a secure place, but NEVER STORE THIS MANUAL INSIDE THE SAFE!
Opening With Combination Dial
1. Turn dial RIGHT (clockwise) three times to clear settings.
2. Start the dial on 0 (zero) to dial combination,
3. Turn dial RIGHT, passing first combination number FOUR (4) times and
stop at number on fifth time around.
4. Turn dial LEFT, passing second combination number TWO (2) times and
stop at number on third time around.
5. Turn dial RIGHT, passing third combination number ONE (1) time and
stop at number on the second time around.
6. Turn dial LEFT, to the last combination number and STOP.
7. Insert the key in the lock and turn key RIGHT, then move handle to the
open position and pull door open.
Closing & Locking The Safe
1. When open, the key is turned right (the unlocked position).
2. Close the safe door and turn the key to the left.
3. Handle will automatically move to closed position.
4. Remove the key and spin the combination dial twice.
Frequent Key-Only Access
When circumstances require frequent, quick and convenient access for limited
periods during the day, you may choose to keep the commbination positioned
on the last number and lock only the keylock. However, the safe is not fully
locked until spinning the dial.