MSDS

ManualsBrandsFirst Alert Manualsequipment cleansing kit1-A:10-B:C

14. TRANSPORT INFORMATION

Hazard Class or Division: Not a hazardous substance..

For additional transport information, contact Ansul Incorporated.

No harm to the environment is expected from this preparation.

15. REGULATORY INFORMATION

Product:

EU Classification: Xn Harmful.

R Phrases: 22 Harmful if swallowed.

36/37/38 Irritating to eyes, respiratory system, and skin.

S Phrases: 26 In case of contact with eyes, rinse immediately with plenty of water and seek

medical advice.

36 Wear suitable protective clothing.

Limit Values for Exposure:

Nuisance dust limit:

OSHA TWA: 15 mg/m

ACGIH TLV-TWA: 10 mg/m

EINECS Status: All components are included in EINECS inventories or are exempt from

listing.

EPA TSCA Status: All components are included in TSCA inventories or are exempt from listing.

Canadian DSL (Domestic Substances List): All components are included in the DSL or are exempt from listing.

Environmental restrictions: None are known.

Restrictions on Marketing and Use: None are known.

Refer to any other national measures that may be relevant.

16. OTHER INFORMATION

Format is from directive 2001/58/EC.

EINECS data is from http://ecb.jrc.it/existing-chemicals/

Data used to compile the data sheet is from Ansul Material Safety Data Sheet, March, 2003.

Toxicological information added from the EINECS ESIS (Existing Substances Information System).

A rating under WHMIS has been added, following the Canadian guidelines.

17. DISCLAIMER

THE ABOVE INFORMATION IS BELIEVED TO BE CORRECT, BUT DOES NOT PURPORT TO BE ALL INCLUSIVE AND

SHALL BE USED ONLY AS A GUIDE. ANSUL SHALL NOT BE HELD LIABLE FOR ANY DAMAGE RESULTING FROM

HANDLING OR FROM CONTACT WITH THE ABOVE PRODUCT.

(WHMIS) CANADIAN WORKPLACE HAZARDOUS MATERIAL

IDENTIFICATION SYSTEM RATINGS:

This product is rated: D2B – Product may irritate skin, eyes or mucous membranes.

(HMIS) HAZARDOUS MATERIAL IDENTIFICATION SYSTEM RATINGS:

HEALTH: 1 4. Severe Hazard

___

FLAMMABILITY: 0 3. Serious Hazard

___

REACTIVITY: 0 2. Moderate Hazard

___

1. Slight Hazard

0. Minimal Hazard

Page 5FORAY (Continued)

ANSUL and FORAY are trademarks of Tyco International Ltd. or its affiliates.

MSDS available at http://www.ansul.com