Instructions / Assembly

19
WARNING
ANTI-TIPPING DEVICE
!
Drywall or plaster with
available wood stud
Drill 1/8-inch (3mm)
diameter pilot hole(s) into the
wood stud(s), at the height
you marked with pencil.
Drywall without available
wood stud
Drill 27/64-inch (10.5mm)
diameter hole (s) through the
wall at the height you marked
with pencil.pencil.
Drive the plastic plug(s) into
the hole(s), using a hammer
if needed.
Masonry
Drill 27/64-inch (10.5mm)
diameter hole(s) 2-inches
(50mm)
deep into the wall at the
height you marked with
pencil.
Drive the plastic plug(s) into
the hole(s), using a hammer
if needed.
Anti-tipping device bag
27/64”
(10.5mm)
1/8”
(3mm)
Electric drill
(not provided)
Fixing hole
(round)
Threading hole
(oval)
WALL ANCHORING GUIDE
The hardware you should use to secure your furniture to the wall depends on both your type of
furniture and your wall material.
Using anti-tipping device to attach your furniture to the cavity wall.
If your wall material is not listed here, or if you have any
questions,consult your local hardware store.
TYPE OF WALL MATERIAL
Use the following guide to identify your wall material and choose the corresponding steps.
Mark the attachment point(s) with a pencil at the appropriate height.