User's Manual

FZ200BS Manual VERSION 0.1.0
33
(2) Sorts of START MESSAGE
COORD START OK
: A Device starts as Coordinator and the Zigbee Network is configured properly.
Thus, data transmission is possible.
COORD START ERROR
: A Device starts as Coordinator, and the Zigbee Network Configuration is failed.
In this situation, a normal Zigbee Network cannot be configured.
After initializing the Device to factory set value (AT&F) and set the Device to Coordinator again,
Change the Channel used.
ROUTER START OK
: A Device starts as Router and the Zigbee Network is configured properly.
Thus, Zigbee Network Extension and data transmission is possible.
ROUTER START ERROR
: A Device starts as Router, and the Zigbee Network Configuration is failed.
See if there is Coordinator around.
See if there is Router participated in the Zigbee Network configured by Coordinator.
See if there is channel which is the same as the one Coordinator use.
END START OK
: A Device starts as End Device and the Zigbee Network is configured properly.
Thus, data transmission is possible.
END START ERROR
: A Device starts as Router, and the Zigbee Network Configuration is failed.
See if there is Coordinator around.