User's Manual

FZ200BS Manual VERSION 0.1.0
30
ERROR LED shows its status.
10. FZ200BS Management TIP
Refer to the following to configure Zigbee Network properly in terms of data transmission and Controls.
10-1. FZ200BS Device Type Set-up
(1) End Device Set-up
Set FZ200BS to End Device before Coordinator and Router is set. (AT+SETEND)
Turn the power of the FZ200BS OFF.
(2) Router Set-up
Set FZ200BS to Router before Coordinator is set. (AT+SETROUTER)
Turn the power of the FZ200BS OFF.
(3) Coordinator Set-up
Set FZ200BS to Coordinator. (AT+SETCOORD)
Turn the power of FZ200BS OFF.
10-2. Zigbee Network Configuration