User's Manual

FZ200BS Manual VERSION 0.1.0

9-2. Set-up FZ200BS Device Type

Zigbee Device is classified as Coordinator, Router, and End Device by objective of its operation.

There should be Coordinator in the Zigbee Network. A Coordinator should exist in a Zigbee Network.

Coordinator manages the Network in the Zigbee Network.

Router extends the Network in the Zigbee Network.

End Device participates in the Zigbee Network using low power consumption.

Router and End Device are automatically participated in the Network once Coordinator configures the

Zigbee Network.

Note : Please, refer to the following when you try to configure the Zigbee Network.

1. Do not turn the power of the Device set to Coordinator ON before all devices’ types are set.

2. If you already set the rest type of each Device and operate them with the Coordinator that the power

is turned on, execute Factory Reset for the devices set to Coordinator and Router.

Before the Factory reset, the power of the Coordinator and the Router should be turned OFF. After the

Factory reset is done, set each Device to Coordinator and Router, and turn on the power of all

devices. The Zigbee Network shall be properly configured.