User's Manual

FZ200BS Manual VERSION 0.1.0
16
5. LED Indication / Reset Switch
LED State Description
Power LED Power Input Red Power LED is lit.
Create a network or networks involved
in the case, Status LED flashes about
one second intervals.
Network Creation
or Participation
Did not create the network or the
network did not participate in the
case, Status LED blinks rapidly.
If the target is set, the Status LED is
lit
Target Setting
If you have not set a target of
approximately 1 second intervals
Status LED blinks.
Status LED
Check the
Operation Mode
AT Command Mode is turned off if
the Status LED
Check data
transmission
If data transmission is completed, the
OK LED blinks once.
OK LED
Check the
Operation Mode
AT Command Mode if the OK LED is
lit.
Check data
transmission
If you did not complete the data
transmission has ERROR LED flashes
once
STATUS LED
ERROR LED
Check the
Operation Mode
AT Command Mode if the ERROR LED
is lit.