User's Manual

FBS100BC-SPP/HID User Guide Version 0.1

Page 12 / 28

4 FASET Switch

The switch for changing the environment setting value of

FBS100BC-SPP to the factory setting value.

The procedures to make the FASET are as followings.

1. Power ON

2. Press the FASET switch more than 2 seconds.

5 POWER LED LED to check the power supply condition

6 STATUS LED LED to check the action of FBS100BC-SPP

7 TX LED LED to check the data output condition of FBS100BC-SPP

8 RX LED LED to check the data input condition of FBS100BC-SPP

9 SERIAL INTERFACE LED

LED to check whether the communication interface is RS-

232

10 USB INTERFACE LED LED to check whether the communication interface is USB