OEM/Integrators Installation Manual Bluetooth Low Energy Embedded Module FBL700BC User Guide Version 1.0 FIRMTECH Co., Ltd. Homepage : http://www.firmtech.co.kr Cafe : http://cafe.naver.com/firmtech7 Mail : contact@firmtech.co.
FBL700BC User Guide Version 1.0 Revision History Revision History Revision Date Ver 1.
FBL700BC User Guide Version 1.0 (C) Copyright FIRMTECH Co., Ltd. 2005 (C) Copyright FIRMTECH Co., Ltd. 2005 All rights reserved The products and operation descriptions contained herein shall be protected by copyright law. Any part or whole of products or operation description shall not be copied, reproduced, translated, nor transformed into readable form by electronic device or machines, without prior consent in writing by FIRMTECH Co., Ltd.
FBL700BC User Guide Version 1.0 List of Content List of Content Revision History ........................................................................................................................... 2 (C) Copyright FIRMTECH Co., Ltd. 2005 ....................................................................................... 3 List of Content ............................................................................................................................. 4 1 What is Bluetooth? ..........
FBL700BC User Guide Version 1.0 1 What is Bluetooth? 1 What is Bluetooth? 1.1 Features of Bluetooth Objectives of Bluetooth : To Realize Wireless Communication for Short Distance with Low Power Consumption, High Reliability, and Low Cost. Frequency in Use: To Use ISM(Industrial, Scientific, Medical) Band which does not require any permission to use. - 2.400 – 2.4835 GHz, 79 channels 2.465 – 2.
FBL700BC User Guide Version 1.0 2 Product Overview 2 Product Overview Major Features of FBL700BC 1. Bluetooth Specification 5.1 Low Energy Support 2. Easily Applicable to the Product with 8 Pins Header Type 3. 4. Support AT Command, and capable to control FBL700BC by using AT Command UART can be used as an interface ※ We request the new users of FBL700BC to read the information on this description carefully before they start to use the products. 3 Product Components 3.
FBL700BC User Guide Version 1.0 4 FBL700BC Appearance 4 FBL700BC Appearance 4.
FBL700BC User Guide Version 1.0 4 FBL700BC Appearance 4.2 FBL700BC PIN Assign NO Name of Signal Features I/O Level Output TTL Input TTL Input TTL 1 GND Ground 2 VCC DC 3.
FBL700BC User Guide Version 1.0 5 Interface (Pin Connection) -FA_SET / CONFIG_SELECT If you want to enter the configuration mode, turn on the power to the module while inputting LOW Signal (0V) to Configuration Select (No. 4 pin). If you want to change to the factory default value, enter the LOW Signal (0V) for more than 4 seconds into the Factory Reset (Pin No. 4) after entering the configuration mode and all setting values will be changed to the original purchase status.
FBL700BC User Guide Version 1.0 6 Interface Board (Jig Board) 6 Interface Board (Jig Board) No. Title Description 1 UART communication & power port UART communication interface terminal for PC connection 5V power input terminal 2 Power ON/OFF Switch Interface Board Power On/Off Switch USB LED: USB port status LED POWER LED: 3.
FBL700BC User Guide Version 1.0 7 Specification of FBL700BC 7 Specification of FBL700BC No. Part Specification 1 Bluetooth Spec. Bluetooth Specification 5.1 Low Energy Support 2 Communication distance 10 M 3 Frequency Range 2402 ~ 2480 MHz ISM Band 4 Sensitivity -79dBm (Typical) 5 Transmit Power 0dBm(Typical) 6 Size 18 x 20 mm 7 Support Low Energy Service Serial Service 8 Input Power 3.
FBL700BC User Guide Version 1.0 8 Current Consumption 8 Current Consumption Current Consumption (mA) Status MIN MAX AVG Ready 0.73 0.77 0.73 Advertising 0.82 0.99 0.88 Connection 1.15 1.21 1.17 < Table 8-1 Peripheral Current Consumption of FBL700BC> Current Consumption (mA) Status Ready Scanning Connection MIN MAX AVG 0.73 0.77 0.73 10.40 10.53 10.47 1.11 1.17 1.13 < Table 8-2 Central Current Consumption of FBL700BC> TEST CONDITIONS Baud Rate : 9600 bps, Input Voltage : DC 3.
FCC MODULAR APPROVAL INFORMATION EXAMPLES for Manual This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or co‐ location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product.
