User's Manual

25
Contact: Firmtech.Co,LTD www.firmtech.co.kr [e-mail].k
r
T. +82.31.719.4812 F. +82.31.719.4834 FB900AS User Manual ver1.0D
4) Set the flow control of FB900AS① and FB900AS② as on.
When the flow control is on, it does not output “BT-Bridge Connection OK” message.
5) After setting, power off them and their PIN3 is off.
6) Power on FB900AS①.
7) Power on BM1001 is Master mode.
8) After FB900AS① CHANNEL_1 is connected, power on FB900AS②.
9) After FB900AS② CHANNEL_1 is connected, power on FB900AS③
10) After FB900AS③ CHANNEL_1 is connected, power on BM1001 is slave mode.
11) After finish all connection, BM1001 output “BT-Bridge Connection OK” message.