User's Manual

24
Contact: Firmtech.Co,LTD www.firmtech.co.kr [e-mail].k
r
T. +82.31.719.4812 F. +82.31.719.4834 FB900AS User Manual ver1.0D
6) After establish the connection, CHANNEL_1 LED is ON.
7) Power on the BM1001 is Slave mode.
8) FB900AS’s CHANNEL_2 LED is blinking.
It means that FB900AS try to connect with BM1001 (Slave mode device).
9) After establish the connection, CHANNEL_2 LED is ON.
10) After finish the connection, BM1001 output “BT-Bridge Connection OK” message.
[2] Several FB900AS and two BM1001s
this is the Bluetooth Link chain.
[FB900AS multi connection]
1) Set the PIN code of BM1001s as “BTWIN”
2) Set the PIN3 of the DIP switch of FB900AS① and FB900AS② as on in order to into the pc
configuration mode.
3) PC configuration mode is start. User can see the below picture.
FB900AS Operation
mode MODE1
BM1001 ROLE
MASTER
①
BM1001 ROLE
SLAVE
④
② ③
FB900AS ① FB900AS ② FB900AS ③