User's Manual

23
Contact: Firmtech.Co,LTD www.firmtech.co.kr [e-mail].k
r
T. +82.31.719.4812 F. +82.31.719.4834 FB900AS User Manual ver1.0D
8. Operation Mode
User uses the FB900AS to connect between two bluetooth devices normally.
The bluetooth device’s role is one of Master and Slave normally.
Between two bluetooth devices to communicate, one should be a Master and opposite side
should be a Slave. In this case FB900AS’s operation mode is should be MODE1 to connect with
them.
Sometimes the bluetooth devices to connect with FB900AS are slave.
In this case FB900AS’s operation mode is should be MODE2 to connect with them.
8.1 Operation Mode1
There are two BM1001s. One is master mode and the other is slave.
FB900AS is should be Operation MODE1 to connect with them.
[1] One FB900AS and two BM1001s
[운영모드 MODE1의 접속 형태]
1) Set the PIN code of BM1001s as “BTWIN”.
2) FB900AS’s 4 DIP switches are OFF.
3) Power on the BM1001 is Master mode.
4) Power on the FB900AS.
5) FB900AS’s CHANNEL_1 LED is blinking.
It means that FB900AS try to connect with BM1001 (Master mode device).
FB900AS
OP1
BM1001 ROLE
MASTER
BM1001 ROLE
SLAVE
① ②