User's Manual

20
Contact: Firmtech.Co,LTD www.firmtech.co.kr [e-mail].k
r
T. +82.31.719.4812 F. +82.31.719.4834 FB900AS User Manual ver1.0D
[1-1-3] The default setting is enable.
2.2 PIN CODE
[1-2-1] It is like a password.
[1-2-2] To connect between two devices, they have to have a same pin code.
[1-2-3] You can enter the pin code within 12 characters.
[1-2-4] After enter the pin code, “Change complete !!” message will be displayed.
And then move to AUTHENTICATION SUB MENU.
2.3 Encryption
[1-3-1] This encrypt the data between two bluetooth devices.
[1-3-2] The default setting is enable.
[1-3-3] If the authentication is disable, this is disable too.
[3] LOCAL NAME
NO Menu Default Value
3 Local Name BT-Bridge
[3.1] Bluetooth device’s name
User can change the device name within 12 characters.
[3.2] Afterward input the name then press the enter key.
Appear “Change Complete!!” message and then move to TOP MENU.
[4] TARGET address
NO Menu Default Value
4 Target Master Add 000000000000
5 Target Slave Add 000000000000
[4-1] The last connected device’s address.
[4-2] If user wants to connect with new bluetooth devices, enter the new address to this menu.
[4-3] To enter the BD address the connection mode should be MODE3.