User's Manual

13
Contact: Firmtech.Co,LTD www.firmtech.co.kr [e-mail].k
r
T. +82.31.719.4812 F. +82.31.719.4834 FB900AS User Manual ver1.0D
3)
If you want to get back the default setting, push the reset button on PC configuration
Mode.
4) After finish the initialization, FB900AS will stop working.
5) Reboot FB900AS.
Parameters Remote control Disable Remote control enable
Authentication Enable Enable
Pin code BTWIN BTWIN
Local Name BT-bridge BT-bridge
Target Master BD Address 000000000000 000000000000
Target Slave BD Address 000000000000 000000000000
Flow Control OFF OFF
Connection MODE - MODE1
Remote Control ID - admin
Remote Control PW - BTWIN
Operation MODE - MODE1
< FB900AS 의 Default parameters >
[5.1.4] Remote Control
PIN NO Remote Control Disable Remote Control Enable
4
FB900AS provided the remote control features.
User can access the FB900AS to change its parameters at remote site through Bluetooth serial
device. If FB900AS is located in the position of difficult access, user can control and set the
parameters of FB900AS through this feature.
When using this feature, the access delay time is about 2 seconds.