User's Manual

10
Contact: Firmtech.Co,LTD www.firmtech.co.kr [e-mail].k
r
T. +82.31.719.4812 F. +82.31.719.4834 FB900AS User Manual ver1.0D
5. Function Select Switch
User can set the function of FB900AS with 4 DIP Switches.
Pin NO OFF ON
1 Operation Mode1 Operation Mode2
2 Connection Mode1 Connection Mode3
3 Normal working mode PC configuration Mode
4 Remote Control Disable Remote control Enable
5.1 Explain the DIP Switch
[5.1.1] Operation MODE
PIN No MODE1 MODE2
1
User uses the FB900AS to connect between two bluetooth devices normally.
The bluetooth device’s role is one of Master and Slave normally.
Between two bluetooth devices to communicate, one should be a Master and opposite side
should be a Slave. In this case FB900AS’s operation mode is should be MODE1 to connect with
them.
Sometimes the bluetooth devices to connect with FB900AS are slave.
In this case FB900AS’s operation mode is should be MODE2 to connect with them.
Operation MODE1
There are two bluetooth devices to connect with FB900AS.
One is master mode and the other device is slave mode.
FB900AS’s operation mode should be MODE1 to connect with them.
If user wants to make the link chain with FB900AS, we recommend this mode.