User's Manual

FB755AC & FB755AS Version 1.0.3
- 16 -
6 PRELIMINARY PRODUCT COMPONENTS
The preliminary value of product is set as on the <Table 6-1>.
Please be sure of basic set value and so on before using the product.
TYPE SET VALUE
Device Name FB755v.x.x.x
Pin Code(Pass key) BTWIN
Uart(baud rate-data bit-parity bit-stop bit) 9600-8-N-1
ROLE SLAVE
Connection Mode MODE4 (AT command)
Operation Mode MODE0 (1:1 communication)
Debug char 0x02
<Table 6-1 : Preliminary Configuration Setting Value for FB755AC & FB755AS >
To change the configuration set value of FB755AC & FB755AS, connect FB755AC & FB755AS to
the PC using the PC Interface board then, you may change using the PC software (such as
Window Hyper Terminal, FIRMTECH’s PC configuration program). With MICOM, you may
change the set value by using AT command.
Note : For details on the setting change, please refer to 8 How to complete PC Configuration.