User's Guide

FB755AC-F & FB755AS-F User Guide Version 1.1
11 How to complete PC Configuration?
Page 30 / 31
Note :
At <Figure 11-11> condition, Pressing Reset button for more than 2 seconds will reset all the
configured values to the initial status (factory preset status).
Following is the order to use the menu.
(1) The execution will only be executed by pressing the “Enter” key.
(2) The small character “t” will always move to be positioned at upper side of the menu.
(3) To move menu, use the number in the end of left side. Please be sure to “Enter” key upon
completion of input.
(4) “←” key is used to delete the entered character currently.
(5) If the entered character is unreadable or is not supported at the appropriate menu, “Retry >”
message will be output.
(6) If the input message is more than 12 characters, “Overflow buffer” message will be output and then
“Retry >” message appeared as well.
Upon completion of all PC configuration, turn off the Interface Board, switch the PC
Configuration/Operation Selection switch OFF, and turn the power ON, which will start the Bluetooth to
operate normally.
Note :
Please refer to Appendix A PC Configuration for the detailed description on the configuration
value.