User's Guide

FB755AC-F & FB755AS-F User Guide Version 1.1
10 Connecting the wireless section of Bluetooth
Page 21 / 31
(6) Check the blinking of status LED on interface board.
(7) Remove the interface board of the 1st FB755AC-F& FB755AS-F from the serial port of PC. (On the
state of power ON)
(8) Connect the interface board of the second FB755AC-F & FB755AS-F to the serial port of PC and
switch ON. (The selection switch of environment setting/bluetooth shall be in OFF.)
<Figure 10-4 Connection Wizard Step 4>
(9) Click the FIRMTECH MASTER Set-up (<Figure 10-4> Blue borders) Button
1 COM PORT : Select the Serial port of PC connected a product
2 DEBUG CHAR : Default is 0x02. (Refer to the appendix A about PC Configuration)
<Figure 10-5 Connection Wizard Step 5>