User's Guide

FB755AC-F & FB755AS-F User Guide Version 1.1

9 Preliminary Product Components

Page 18 / 31

9 Preliminary Product Components

The preliminary value of product is set as on the <Table 9-1>.

Please be sure of basic set value and so on before using the product.

Type

Set Value

Device Name

FB755vx.x.x

Pin Code (Pass key)

BTWIN

Uart (baud rate-data bit-parity bit-stop bit)

9600-8-N-1

ROLE

SLAVE

Connection Mode

MODE4 (AT command)

Operation Mode

MODE0 (1:1 communication)

Debug Char

0x02

To change the configuration set value of FB755AC-F & FB755AS-F, connect FB755AC-F & FB755AS-F to the

PC using the PC Interface board then, you may change using the PC software (such as Window Hyper

Terminal, FIRMTECH’s PC configuration program). With MICOM, you may change the set value by using AT

command.

Note :

For details on the setting change, please refer to 11 How to complete PC Configuration.