User's Manual

FB200AS User Guide Version 1.0 11 How to complete PC Configuration?
Page 23 / 28
1 WRITE PARAMETERS: Save the currently set values.
2 RETURN TO READ: Set to the initial value.
<Figure 11-5 BTConfig tool WRITE >
Note:
Please refer to the appendix A of PC Configuration for the detailed description.
11.2 PC Configuration using Serial Communication (Hyper Terminal)
Program
11.2.1 To Execute Hyper Terminal
To set up PC Configuration using Hyper Terminal, following procedures shall be performed prior to the
power is being supplied after the FB200AS is connected to the PC.
To set up PC Configuration, the Serial Communication Program is required. We will use Hyper Terminal in
describing the procedures.
(1) Fix the number 4 switch of Function Dip Switch at ON.
(2) Connect FB200AS to the USB port, and turn the power on.