FB200AS User Guide Version 1.0 9 Initial Set Value of Products 9 Initial Set Value of Products The product has the initial Set Value as shown on the
. Please be sure to identify the initial Set Value, before you begin to use. TYPE Set Values Device Name FB200v1.FB200AS User Guide Version 1.0 10 Connecting the wireless section of Bluetooth 10 Connecting the wireless section of Bluetooth In order for Bluetooth devices to transmit data to each other, the wireless section of Bluetooth should be connected to each other. To connect the wireless section, you should set each role for each device, one for a Master, another for a Slave. It takes about 1~10 sec that a Master is connected to a Slave.
FB200AS User Guide Version 1.0 10 Connecting the wireless section of Bluetooth (3) Click FIRMTECH SLAVE Set-up button ( Blue borders) 1 COM PORT : Select Serial port of PC connected a product. 2 DEBUG CHAR : Default is 0x02. (Refer to the appendix A about PC Configuration) 3 DEVICE COUNT : Select number of devices to be connected.
FB200AS User Guide Version 1.0 10 Connecting the wireless section of Bluetooth 1 Procedures: procedures of Device Set-up. 2 SLAVE Device value: It shows values if the SLAVE Set-up is completed (optional) (5) Status Display of Procedures(N. 1 red borders) turns red into green after Set-up is completed. Click the OK button if the blank of SLAVE Device Value is filled. (N.
FB200AS User Guide Version 1.0 10 Connecting the wireless section of Bluetooth 1 COM PORT : Select the Serial port of PC connected a product 2 DEBUG CHAR : Default is 0x02. (Refer to the appendix A about PC Configuration) (8) Click Set-up Start ( blue borders) button after setting each value ( red borders N.1 - Com Port connected to FB200AS , N.2 - 0x02) in blanks.
FB200AS User Guide Version 1.0 10 Connecting the wireless section of Bluetooth (10) Set Function Dip Switch #3 to MASTER after turn the FB200AS(2)’s power off. (11) The LED on Status LED of FB200AS(2) is turned ON shortly (It takes about 1 ~ 10sec) after the power is turned on if the wireless section of Bluetooth is connected properly, and Data Transmission is possible.
FB200AS User Guide Version 1.0 11 How to complete PC Configuration? 11 How to complete PC Configuration? The Baud rate or Role is selectable using Dip Switch. (In case, CONNECTION MODE is not MODE4.) For other setting values, you can establish the setting using PC Configuration. PC Configuration can be performed with two significant ways. First is to use Configuration tool provided by FIRMTECH Co., Ltd. Second is to use the serial communication programs such as Hyper Terminal or Mincom provided by OS.
FB200AS User Guide Version 1.0 11 How to complete PC Configuration? 1 DEBUG CHARACTER : Default is 0x02. (refer to the appendix A about PC Configuration) 2 SERIAL PORT : COM PORT proper port, BAUDRATE 9600, PARITY BIT None, STOP BIT 1 1 SERIAL OPENED, READ TO SET : BTConfig tool and communication status of products.
FB200AS User Guide Version 1.0 11 How to complete PC Configuration? (4) If the comes up, set each blank (Red borders N.1~2) to (COM PORT – Port connected to Interface Board, BAUDRATE – 9600, PARITY BIT – None, STOP BIT – 1). After the setup, click the OPEN button (Red borders N.3), then Serial Connection and Ready To Set (Red borders N.1) parts become green as shown on . If they don’t become green, check the COM PORT and execute BTConfig tool once again.
FB200AS User Guide Version 1.0 11 How to complete PC Configuration? 1 WRITE PARAMETERS: Save the currently set values. 2 RETURN TO READ: Set to the initial value. Note: Please refer to the appendix A of PC Configuration for the detailed description. 11.2 PC Configuration using Serial Communication (Hyper Terminal) Program 11.2.
FB200AS User Guide Version 1.0 11 How to complete PC Configuration? (3) Execute in the order of [start][All Programs][Accessories][Communications][Hyper Terminal], then connection window will appear on which enter appropriate name and click. (4) When the comes up, select the COM port connected to FB200AS, and clicks the OK button.
FB200AS User Guide Version 1.0 11 How to complete PC Configuration? (5) When Registration Information Window comes up as on , select Bit per second : 9600, Data bit : 8, Parity : none, Stop bit : 1, Flow control : none, which will execute Hyper Terminal.
FB200AS User Guide Version 1.0 11 How to complete PC Configuration? (6) (6) Basically, the Hyper Terminal does not show the entered character. To make sure of the entered character, select [File][Properties] on the Menu, then registration information window will appear shown as on , click the ASCII Setup button. (7) As shown on , Check “Echo typed characters locally” and come out pressing the acknowledge button.
FB200AS User Guide Version 1.0 11 How to complete PC Configuration? 11.2.2 How to Use PC Configuration Menu The user may select the menu to change by selecting the given number in front of the left end menu. For example : To change “DEVICE NAME”, enter : [1][Enter] Note : When Reset Button is pressed at , all the set up value shall be reset to the initial set up status (factory fix point). Following is the order to use the menu.
FB200AS User Guide Version 1.0 12 Approval Information 12 Approval Information 12.1 KCC 12.2 FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference received. 2. This device must accept any interference received. Including interference that may cause undesired operation. FCC WARNING This equipment may generate or use radio frequency energy.
