User's Manual

FB155BC User Guide Version 2.1
11 How to complete PC Configuration?
Page 27 / 2
11.2.2 How to Use PC Configuration Menu
The user may select the menu to change by selecting the given number in front of the left end menu.
For example : To change “GO TO BLUETOOTH PARAMETER MENU”, enter : [1]
[Enter]
Note :
At <Figure 11-11> condition, Pressing Reset button for more than 2 seconds will reset all the
configured values to the initial status (factory preset status).
Following is the order to use the menu.
(1) The execution will only be executed by pressing the “Enter” key.
(2) The small character “t” will always move to be positioned at upper side of the menu.
(3) To move menu, use the number in the end of left side. Please be sure to “Enter” key upon
completion of input.
(4) “←” key is used to delete the entered character currently.
(5) If the entered character is unreadable or is not supported at the appropriate menu, “Retry >”
message will be output.
(6) If the input message is more than 12 characters, “Overflow buffer” message will be output and then
“Retry >” message appeared as well.
Note :
Please refer to Appendix A PC Configuration for the detailed description on the configuration
value.