User's Manual

FB155BC User Guide Version 2.1
10 Connecting the wireless section of Bluetooth
Page 19 / 
1 COM PORT : Select the Serial port of PC connected a product
2 DEBUG CHAR : Default is 0x02. (Refer to the appendix A about PC Configuration)
<Figure 10-5 Connection Wizard Step 5>
(10) Click Set-up Start (<Figure 10-5> blue borders) button after setting each value (<Figure 10-5> red
borders
N.1 - Com Port connected to FB755AX, N.2 - 0x02) in blanks.
<Figure 10-6 Connection Wizard Step 6>
(11) If the Status Display of Procedures (<Figure 10-6> N.1 red borders) turns red into green,
Connection Set-up is completed. With Clicking the End button(<Figure 10-6> Blue borders), finish
the C-Wizard
10.2 Connection with AT commands
The serial communication program is necessary to connect with AT commands.
The setting is available using the hyper terminal offered by Windows and refer to the following “11.2.1
Execution of hyper terminal” to set hyper terminal.
Refer to the “4. How to use AT commands” of “Appendix B – AT Command Language with Detailed
Description and Usage” to use the AT command.