User's Manual

FB155BC-F2S-SPP/HID User Guide Version 0.1
5 PC Interface Board (Jig Board)
Page 11 / 25
No.
Title
Description
1
Power ON/OFF Switch
ON/OFF the electric power of interface board.
2
USB/RS232 Interface Selection Switch
The switch for selection of communication in USB/RS232
(The 3 switches shall be set in same direction.)
3
PC Configuration/Operation Selection
Switch
Not is use
4
FASET Switch
The switch for changing the environment setting value of
FB155BC-F2S-SPP to the factory setting value.
The procedures to make the FASET are as followings.
1. Power ON
2. Press the FASET switch more than 2 seconds.
5
POWER LED
LED to check the power supply condition
6
STATUS LED
LED to check the action of FB155BC-F2S-SPP
7
TX LED
LED to check the data output condition of FB155BC-F2S-
SPP
8
RX LED
LED to check the data input condition of FB155BC-F2S-SPP
9
SERIAL INTERFACE LED
LED to check whether the communication interface is RS-
232
10
USB INTERFACE LED
LED to check whether the communication interface is USB
<Table 5-1 FB155BC-F2S-SPP Interface Board Description>