User's Manual

FB155BC Version 2.0.0
- 13 -
6 PRELIMINARY PRODUCT COMPONENTS
The preliminary value of product is set as on the <Table 6-1>.
Please be sure of basic set value and so on before using the product.
TYPE SET VALUE
Device Name FB155v.x.x.x
Pin Code(Pass key) BTWIN
Uart(baud rate-data bit-parity bit-stop bit) 9600-8-N-1
ROLE SLAVE
Connection Mode MODE4 (AT command)
Debug char 0x02
<Table 6-1 : Preliminary Configuration Setting Value for FB155BC >
To change the configuration set value of FB155BC, connect FB155BC to the PC using the PC
Interface board then, you may change using the PC software (such as Window Hyper Terminal,
FIRMTECH’s PC configuration program). With MICOM, you may change the set value by using
AT command.
Note : For details on the setting change, please refer to 8 How to complete PC Configuration.