User's Manual

FB100AS User Guide Version 1.0 12 How to complete PC Configuration?
페이지 19 / 27
12 How to complete PC Configuration?
The Baud rate or Role is selectable using Dip Switch. (In case, CONNECTION MODE is not MODE4.)
For other setting values, you can establish the setting using PC Configuration.
PC Configuration can be performed with two significant ways.
First is to use Configuration tool provided by FIRMTECH Co., Ltd.
Second is to use the serial communication programs such as Hyper Terminal or Mincom provided by OS.
The ways to configure are as follows respectively.
12.1 PC Configuration using BTConfig tool
(1) Please provide FB100AS with power, then check if the Status LED of FB100AS is flickering or not. If
red LED is flickering, turn off the power and set the fourth of FUNCTION Dip-Switch at OFF position.
(2) Please connect FB100AS to the serial port of PC, and turn the power on to execute the BTConfig
tool.
<Figure 12-1 BTConfig tool main display>
(3) Select main “CONNECT” (<Figure 12-1> Outlined Blue) on main display.