Brochure

38 • FIREYE PRIMELINE PRODUCTS
MB Series MULTI-BURNER CONTROL Bulletin MB-6001
The Fireye Multi-Burner Monitoring System controls the start-up
sequence and monitors the flame of up to 20 individual gas, oil, or
combination gas/oil burners connected to a common valve train.
Its dynamic on-board testing checks for faulty relays, proof of
valve closure, high and low fire switch interlocks, and shorted air
switch. Exclusive to the unit is its ability to specifically identify
which burner caused the initial flame failure.
The Fireye Multi-Burner Control Monitoring System is a fully inte-
grated control designed for the industrial process market (ovens
and furnaces). It meets the operational requirements and safety
standards pertaining to the industrial process market and offers
many advantages over other systems.
The Fireye Multi-Burner Control System is complete with all func-
tions built into one module, offering the opportunity to greatly
reduce cost and space requirements normally required by other
non-integrated systems. Plug-in flame sensor modules that can sense UV, UV Self-Check and/or flame rod provide for easy replacement on
an individual basis. Start up time is reduced through the use of on board DIP switches that allow quick configuration to meet application
requirements.
The MB-600S, by itself, provides for 4 plug-in flame sensor modules. Expansion modules are available that can be easily attached to the
MB-600S allowing for a system configuration up to 20 burners. Upon startup, the MB-600S interrogates the expansion modules to learn the
number of flame sensor modules installed.
DIMENSIONS
PART NUMBER DESCRIPTION
MB-600S
Multi-Flame System, 120 VAC, 50/60 Hz consisting of motherboard (MB-600M), relay board (MB-600R), logic module
(MB-600L), and power module (MB-600P), con-tains 4 aux inputs, purge modulation, valve leak testing
MB-632S Same as MB-600S except motherboard is MB-632M for RS-232 communications.
MB-685S Same as MB-600S except motherboard is MB-685M for RS-485 communications.
MB-604E Expansion module for up to 4 additional burners
MB-608E Expansion module for up to 8 additional burners
MB-600PF Flame sensor module, UV/Self check UV, or FR with screw tabs for mounting on MB-600S multi-burner control system.
Mounting Holes (6)
9.250"
(235mm)
13.562"
(344mm)
5.500"
(140mm)
6.000"
(152mm)
0.781"
(20mm)
.187" (5mm) Dia.
8.875"
(225mm)
MB-600S
FM
APPROVED
MBPF-600PF
FLAME RELAY
FIREYE¨
MBPF-600PF
FLAME RELAY
FIREYE¨
MBPF-600PF
FLAME RELAY
FIREYE¨
MBPF-600PF
FLAME RELAY
FIREYE¨
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
9
10
E