Brochure

FIREYE PRIMELINE PRODUCTS • 39
MB SERIES FLAME SENSOR MODULES Bulletin MBPF-1001
The MBPF-100S, MB-600PF, MBPF-200S and MBPF-202S modules provide visual
indication and electrical output that signal the user regarding flame presence in a com-
bustion chamber. The module uses Fireye optical ultra-violet scanners and/or flame
rod to sense flame presence independently or as components in a burner management
system. Many operational characteristics are provided including:
UL recognized and FM approved-MBPF-100S, MB-600PF
FM approved - MBPF-200S, MBPF-202S
Self-contained: 120 VAC, 50/60: MBPF-100S, MB-600PF
220 VAC, 50/60: MBPF-200S, MBPF-202S
UV detection or flame rod or both
Flame ON LED
User controlled Flame Fail LED
Analog output test points permits direct reading of flame signal
Uses standard 11-pin relay base
Panel surface or DIN-rail mounting
Remote testing of contacts available
Self-check scanner available for MBPF-100S and MB-600PF
PART NUMBER DESCRIPTION
Flame Sensor
MBPF-100S Single channel module, 120VAC 50/60 Hz, use with UV detection or flame rod or both.
MB-600PF Single channel module, 120VAC 50/60 Hz, use with UV detection or flame rod or both.
Mounting ears provided for use with MB-600S multiburner programming module.
MBPF-200S Single channel module, 220VAC 50/60 Hz, use with UV detection or flame rod or both.
MBPF-202S Single channel module, 220VAC 50/60 Hz, use with UV detection or flame rod or both, 2 sec. FFRT.
Wiring Base
60-2726 Socket, 11-pin, DIN rail or panel surface mounting.
129-172 Kit, retaining, secures module on socket, 60-2627.
Mounting Rails
60-2539-12 DIN style mounting rail, 12 inches., mounts up to 4 modules.
60-2539-24 DIN style mounting rail, 24 inches., mounts up to 8 modules.
60-2539-36 DIN style mounting rail, 36 inches., mounts up to 12 modules.
Ø 0.137"
(4.2mm)
Ø 0.165"
(M3.5)
2 Holes
(18mm)
0.702"
(8mm)
0.315"
8
7
6
5
4
9
10
11
1
2
3
DIN
Rail
(22mm)
0.858"
(25.5mm)
0.9945"
(59mm)
2.301"
2.340"
(60mm)
1.299"
(33mm)
1.299"
(33mm)
Ø 0.164"
(4.2mm)
2 Holes
Panel Cutout for Surface Mounting
(27mm)
1.053"
DIMENSIONS
SOURCE: 230VAC 50/60HZ
OUTPUT LOAD: 1A 250VAC RESISTIVE LOAD
-40 to 60C (-40 to 149°F)
STYLE: 11 pin octal, snap-mount/surface mount
TERMINAL: M3.5 screws with captive wire clamp
WIRE SIZE: Maximum up to 2 - #12 AWG each terminal
ELECTRICAL RATING: 300V, 10A
To secure MBPF to socket use retaining kit - P/N 129-172