Brochure

FIREYE PRIMELINE PRODUCTS • 9
ED510 Display Module Bulletin ED-5101
The ED510 Display Module is designed to operate with the Flame-Monitor
Burner Management Control System using the EP and EPD style programmer
modules.
1
The ED510 display is optional for EPD programmers, but is
required for the EP style programmers.
The ED510 display module provides the following features and capabilities
• LCD backlit display with two (2) lines of sixteen (16) characters each.
• Continuous display of current burner operating status, including first out
annunciation in the event of a lockout condition.
• Three (3) key, tactile dome keypad provides historical information of the
burner, last six (6) lockout conditions (with burner cycle and burner hour
time stamp), assign messages associated with the operation of the E300
expansion module, and diagnostic messages.
• Design which mounts directly onto the front face of the EP style program-
mers.
• RJ style connector for connection to the EP and EPD style programmers.
1
• Remote display capability with the EP and EPD style programmers using
standard DIN sized opening and remote mounting kit.
DIMENSIONS TO REMOTE MOUNT ED510 DISPLAY
1.The EP programmers must have an Eng. code of 28 or higher, the EPD programmers must have an Eng. code of 02 or higher.
Part Number Description
ED510 2 line x 16 character LCD display with keypad.
ED580-1 ED510 Display cable with RJ45 connector – 1 1/4 inch
ED580-2 ED510 Remote display cable with RJ45 connector – 2 feet
ED580-4 ED510 Remote display cable with RJ45 connector – 4 feet
ED580-8 ED510 Remote display cable with RJ45 connector – 8 feet
129-145-1 Remote display (ED510) mounting kit with 4 ft. cable.
129-145-2 Remote display (ED510) mounting kit with 8 ft. cable.
129-145-3 Remote display (ED510) mounting kit with 2 ft. cable.
ED610 Adaptor for mounting ED510 display further than 8 feet away from control.
KEYPAD/DISPLAY
FRONT
GASKET
PEM NUT
INSIDE
MOUNTING
SCREW
MOUNTING
PLATE
MAXIMUM THICKNESS
CONNECTOR
CABLE (2’, 4’, or 8’)
TO EP/EPD PROGRAMMER
5/64 INCH (2.0mm) PANEL
3.63
(92.0)
3.63
(92.0)
SUGGESTED PANEL CUTOUT DIMENSIONS