Product Overview
4
£
ORDERING INFORMATION
CHASSIS (COMMON FOR ALL CONTROLS, INCLUDES DUST COVER):
MC120 120 VAC Supply, 50 Hz/60 Hz
MC120R 120 VAC Supply, 50 Hz/60 Hz. Remote reset capability.
MC120P 120 VAC Supply, 50 Hz/60 Hz. Remote reset and post purge capability.
MC230 230 VAC Supply, 50 Hz/60 Hz
MC230R 230 VAC Supply, 50 Hz/60Hz. Remote reset capability.
PROGRAMMER MODULES:
MP100, MP100E Relight operation.
MP101 Relight operation. Programmer will not lockout on flame signal during
“off cycle.”
MP102, MP102E Non-recycle on flame fail, 5 second PTFI.
MP230 Selectable purge timing, trial for ignition timing, and
recycle/non-recycle operation.
MP230H Selectable purge timing, trial for ignition timing, pilot stabilizing period,
and recycle/non-recycle operation. For use with two stage burners.
MP560 Selectable purge timing, pilot trial for ignition timing, pilot stabilizing
period, and recycle/non-recycle operation. 10 second main flame trial for
ignition, run-check switch.
MP561 MP560 programmer without pilot stabilization period.
MP562 MP560 programmer with lockout on loss of air flow.
Non-recycle operation only.
NOTE: Programmers with the suffix "E" (e.g. MP100E) are for use with the MC230 and MC230R
chassis only.
AMPLIFIER MODULES:USE WITH SCANNERS:
MAUV1 UV amplifier, 2-4 second F.F.R.T. UV1A, UV2, UV8A, 45UV3-1050
MAUV1T UV amplifier, .8 second F.F.R.T. UV1A, UV2, UV8A, 45UV3-1050
MART1 Flame rectification amplifier, 69ND1
2-4 second F.F.R.T.
MART1T Flame rectification amplifier, 69ND1
.8 second F.F.R.T.
UV SCANNERS:
UV1A3 1/2" NPT connector, 3' flex. cable
UV1A6 1/2" NPT connector, 6' flex. cable
UV2 3/8" NPT connector, 3' flex. cable
UV8A 1/2" NPT 90 degree angle head, 6' flex. cable
45UV3-1050 3/4" sleeve/setscrew mount
UV90-3 90
q lateral view with 36" flex conduit
UV90-6 90q lateral view with 72" flex conduit
UV90-9 90q lateral view with 108" flex conduit
FLAME DETECTORS:
69ND1-1000K4 12 inch flame rod, 1/2” NPT connector
69ND1-1000K6 18 inch flame rod, 1/2” NPT connector
69ND1-1000K8 24 inch flame rod, 1/2” NPT connector