Product Overview

ManualsBrandsFireye ManualsHeating Supplies50/60 Hz MB-Series Single Channel Module (220V)



DESCRIPTION

The MBPF-100S, MB-600PF, MBPF-200S and MBPF-202S modules provide visual

indication and electrical output that signal the user regarding flame presence in a

combustion chamber. The module uses Fireye optical ultra-violet scanners and/or

flame rod to sense flame presence independently or as components in a burner man-

agement system. Many operational characteristics are provided including:

• UL recognized and FM approved-MBPF-100S, MB-600PF

• FM approved - MBPF-200S, MBPF-202S

• Self-contained: 120 VAC, 50/60: MBPF-100S, MB-600PF

220 VAC, 50/60: MBPF-200S, MBPF-202S

• UV detection or flame rod or both

• Flame ON LED

• User controlled Flame Fail LED

• Analog output test points permits direct reading of flame signal

• Uses standard 11-pin relay base

• Panel surface or DIN-rail mounting

• Remote testing of contacts available

• Self-check scanner available for MBPF-100S and MB-600PF

Check with Fireye for more details by contacting your local distributor or by check-

ing the Fireye home page at www.fireye.com.

NOTE: When the MBPF modules are used, additional means must be furnished to provide those func-

tions usually provided by flame safeguard control systems to meet local regulations (i.e.: safe start

check, valve closure, starting and running interlocks, safety timings, etc.).

NOTICE: When Fireye products are combined with equipment manufactured by others and/

or integrated into systems designed or manufactured by others, the Fireye warranty, as stated

in its General Terms and Conditions of Sale, pertains only to the Fireye products and not to any

other equipment or to the combined system or it’s overall performance.

MBPF-100S

MB-600PF

MBPF-200S

MBPF-202S

Sensor Modules

MBPF-1001

APPROVED

APRIL 4, 2013

Summary of content (4 pages)

PAGE 1
 MBPF-1001 APRIL 4, 2013 MBPF-100S MB-600PF MBPF-200S MBPF-202S Sensor Modules APPROVED DESCRIPTION The MBPF-100S, MB-600PF, MBPF-200S and MBPF-202S modules provide visual indication and electrical output that signal the user regarding flame presence in a combustion chamber. The module uses Fireye optical ultra-violet scanners and/or flame rod to sense flame presence independently or as components in a burner management system.
PAGE 2
 ORDERING INFORMATION PART NUMBER DESCRIPTION MBPF-200S MBPF-202S Flame Sensor Single channel module, 120VAC 50/60 Hz, use with UV detection or flame rod or both. Single channel module, 120VAC 50/60 Hz, use with UV detection or flame rod or both. Mounting ears provided for use with MB-600S multiburner programming module. Single channel module, 220VAC 50/60 Hz, use with UV detection or flame rod or both. Single channel module, 220VAC 50/60 Hz, use with UV detection or flame rod or both, 2 sec. FFRT.
PAGE 3
 FIGURE 1. DIMENSIONS OF DIN RAILS, WIRING BASES AND FLAME SWITCH MODULES SHOWN IN INCHES (MM) Ø 0.165" (4.2mm) 2 Holes 0.9945" (25.5mm) 1.299" (33mm) 0.315" (8mm) 4 3 5 2 1 6 1.053" (27mm) 2.301" (59mm) SOURCE: 230VAC 50/60HZ OUTPUT LOAD: 1A 250VAC RESISTIVE LOAD -40 to 60C (-40 to 149°F) 2.340" (60mm) Ø 0.137" (M3.5) 11 7 0.702" (18mm) DIN Rail 10 9 8 0.858" (22mm) Panel Cutout for Surface Mounting Ø 0.164" (4.2mm) 2 Holes 1.
PAGE 4
 FIGURE 2. TYPICAL APPLICATION - MBPF-100S In this application, the programmable controller (PLC) can test the flame relay for proper function by applying voltage to Pin #10 and monitoring the contact action on Pins #4, #5 and #6 (Pin#4 opens and Pin #6 closes).