Product Overview

ManualsBrandsFireye ManualsHeating Supplies0.8 Sec. FFRT M-Series II Ultra-Violet Amplifier

DESCRIPTION

The Fireye MART1, MART3, MART1T, MAUV1, MAUV3 and MAUV1T are Amplifier Modules

used with the Fireye Modular M-SERIES II control. These amplifier modules provide flame scan-

ning capabilities using any of the Fireye standard ultraviolet scanners (self-check scanners not appli-

cable) and flame rods. The Flame Failure Response Time (F.F.R.T.) of the control is determined by

the selection of the amplifier module (see Ordering Information). Test jacks are provided on the

amplifier modules to permit flame signal measurement during operation.

After scanner selection, the proper amplifier module must be used in the Modular M-SERIES II

chassis (see Ordering Information). The amplifier module incorporates a plug-in design for ease of

installation.

The programmer module determines the operational characteristics of the control (e.g. relight, purge

timing, etc.).

For proper and safe application of this product, you must refer to bulletins C-4000 or C-4000E for a

detailed description of the operation of the Modular M-SERIES II control, including installation

instructions, operating sequences for the programmer modules, etc. Also follow the scanner installa-

tion and wiring instructions found in bulletins C-4000 or C-4000E for proper flame scanning opera-

tion.

WARNING: Selection of this control for a particular application should be made by a com-

petent professional, licensed by a state or other government agency. Inappropriate application

of this product could result in an unsafe condition hazardous to life and property. Installation

should not be considered complete until pilot turndown and other appropriate performance

tests have been successfully completed.

MART1, MART3,

MART1T, MAUV1,

MAUV3 and MAUV1T

AMPLIFIER MODULES

FOR USE WITH THE FIREYE MODULAR

M-SERIES II CONTROL

C-4002

NOVEMBER 1, 2005

APPROVED

LISTED

Summary of content (4 pages)

PAGE 1
® C-4002 NOVEMBER 1, 2005 MART1, MART3, MART1T, MAUV1, MAUV3 and MAUV1T AMPLIFIER MODULES FOR USE WITH THE FIREYE MODULAR M-SERIES II CONTROL UL £ £ LISTED APPROVED DESCRIPTION The Fireye MART1, MART3, MART1T, MAUV1, MAUV3 and MAUV1T are Amplifier Modules used with the Fireye Modular M-SERIES II control. These amplifier modules provide flame scanning capabilities using any of the Fireye standard ultraviolet scanners (self-check scanners not applicable) and flame rods.
PAGE 2
£ ORDERING INFORMATION Flame Amplifier Selection: P/N DESCRIPTION USE WITH SCANNER MAUV1 UV amplifier, 2-4 second F.F.R.T. UV1A, UV2, UV8A, 45UV3-1050 MAUV3 UV amplifier, 3 second F.F.R.T. UV1A, UV2, UV8A, 45UV3-1050 MAUV1T UV amplifier, .8 second F.F.R.T. UV1A, UV2, UV8A, 45UV3-1050 MART1 Flame rectification amplifier 2-4 second F.F.R.T. 69ND1 MART3 Flame rectification amplifier, 3 second F.F.R.T. 69ND1 MART1T Flame rectification amplifier .8 second F.F.R.T.
PAGE 3
® APPROVALS AGENCY APPROVALS MAUV1 UL CSA FM AGA ✓ ✓ ✓ ✓ MAUV3 MAUV1T ✓ ✓ ✓ ✓ MART1 ✓ ✓ ✓ ✓ MART3 MART1T ✓ ✓ ✓ ✓ EC230 EC298 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Underwriters Laboratories Inc.: Listed Guide MCCZ — File MP 1537 Underwriters Laboratories Inc.: Recognized Components Guide MCCZ2 File MP1537 Canadian Standards Association: Guide 300-1-0.2 Class 2642 Oil File LR7989 Guide 140-A-2 Class 2632 Gas File LR 7989 American Gas Association EN230 EN298 Factory Mutual ANS Z21.
PAGE 4
£ NOTICE When Fireye products are combined with equipment manufactured by others and/or integrated into systems designed or manufactured by others, the Fireye warranty, as stated it its General Terms and Conditions of Sale, pertains only to the Fireye products and not to any other equipment or to the combined system or its overall performance.