Brochure

Setting the Standard...
The Fireye Flame-Monitor product line brings total operational control and
flame safeguard protection for package boiler systems to your fingertips.
Modular in structure, the Flame-
Monitor system allows you to custom
design your control system to match
your specific burner/boiler fuel firing
characteristics.
The complete burner system includes
a Flame-Monitor control, keypad/ dis-
play module and a full library of pro-
grammer modules, amplifier modules
and associated scanners.
Modernization adapters are available
to easily upgrade from an older Fireye
control system.
Current status for each burner plus
historical data relating to burner
cycles, hours of operation, the number
and cause of safety lockouts are read-
ily available locally on the ED510 key-
pad/display module. In the event of a
safety lockout, instant notification is
available with the inTouch Wireless
Monitoring System, keeping boiler
downtime to a minimum.
The Fireye E110 Flame-Monitor is the
basic building block for the entire
flame safeguard control system. It
consists of a chassis, dust cover and a
mounting screw. The addition of the
keypad/display and application
specific programmer, amplifier and
flame scanner completes the system.
The E110 is directly compatible with
all existing Flame-Monitor installations.
•
Two line display with keypad provides access to current
and historical burner information.
•
Programmable E300 Expansion Module interlock messages.
•
Extended purge timing via dipswitches.
•
Selectable airflow (3-P) proven open to start.
•
Multi-drop connection to Communication Interface
via RS485.
•
Modular design.
•
Continuous self-test diag nostics.
•
Modbus communications.
Features of the Flame-Monitor Control System Include:
Keypad/Display Module
The ED510 Keypad/Display Module incorporates a two
(2) line by sixteen (16) character backlit LCD display
and three button keypad to provide both operational
and comprehensive diagnostic information. A remote
mounting kit is available to facilitate panel mounting of
the keypad/display. The ED510 provides a local readout
of the
following information:
• Operating sequence status.
• Flame signal strength.
• First out annunciation of a safety lockout.
• Last six lockout conditions (with burner cycle
and burner hour time-stamp).
• Pilot and main flame signal averages.
• Accumulated burner hours, system hours and
burner cycles each with 6 digit range plus rollover.
• Ability to clear stored history.
All the above features can be accessed
with the push of a button.
Distributed by: