User's Manual Part 1

Firetide - Reliable Connectivity Anywhere 13 January 2011
Alerts
Syslog Conguration
This page lets you congure the settings to connect to a Syslog server.
Enable Syslog: Enable the Syslog settings, if you have a Syslog server on your network.
Syslog Server IP Address: Enter the IP address to which the FWC2050 and managed Access Points will send all SysLogs, if
SysLog option is enabled.
Port: Enter the port number at which your Syslog server is congured to listen to requests.
Alarm Actions
This screen lets you dene actions to be taken for the four dened alarm conditions. For each condition, you can do nothing,
write to syslog, or generate an email to a dened email address.
Alarm Email Conguration
Alarm messages via email require that a mail server be dened.
Server Address: Enter the address or name of the mail server (e.g. smtp.retide.com)
Port: Enter the port on which the mail server receives mail.
User Name: Enter the ‘user name’ that identies the Controller that is sending the message.
Password: Enter the email system password dened for the account.