User's Guide

6 HotPort 5020 User Guide
Installing the Radio Unit
Hooks (4)
Hook Attachments
(4)
Radio Unit with
Mounting Plate
Plate for Pole
or Wall Mount
Captive Screws (4)
Figure 1.4 tHe HotPort 5020
is sHiPPed witH a two-Piece
Mounting Plate already attacHed.
Loosen the four fasteners, two on each
side, to remove the hook-attachment
plate. The captive screws are tight; you
will need channel-lock or slip-joint
pliers.
Figure 1.5 attacH two u-bolt
asseMblies to tHe Mounting Pole.
The U-bolts are large enough to
accomodate large poles; if you are
mounitng on a smaller-dialmeter pole,
you must either cut the U-bolts to
length or use four additional spacer
nutes.
Now you can hang the radio unit on
the bracket, and tighten the four cap-
tive screws.
Figure 1.6 tHe radio unit
Mounts witH a two-Piece Mount-
ing asseMbly.
One half of the assembly is perma-
nently attached to a pole or wall; the
second half, on the radio itself, hooks
over the first.