User's Manual

6 Wireless Mesh Node User Guide

HotPort 3103 Front Panel with Indicators

HotPort Product Description

Front Panel LED Indicators

Indoor HotPort nodes have eight indicator LEDs on the front panel. Upon

power up, all eight LEDs will illuminate continuously for several seconds

until the startup sequence is complete. The post startup functions of the

LEDs are described below.

Power LED

This indicator remains continuously on to indicate that HotPort node is

receiving power.

Fault LED

After start up, this indicator color will change from YELLOW to GREEN to

indicate normal conditions. If the indicator remains YELLOW or changes

from GREEN to YELLOW, this indicates a fault condition.

1, 2, 3, 4 Port LEDs

These four indicators are numbered to correspond to the four rear panel

Ethernet ports.

• Continuously on = link but no activity

• Flashing = link and activity

• Indicator off = no link

Mesh LED

This LED illuminates when the HotPort node connects wirelessly to one or

more HotPort nodes. If this LED is off, the node is not connected to any

other nodes.

Status LED

This indicator will indicate the RF connection as follows:

• Slow ﬂash = 2.4 GHz DSSS

• Fast ﬂash = 2.4 GHz OFDM

• Continuously on = 5 GHz OFDM

• LED off = this node is disabled