User's Manual

Installation and User Guide
Page 18
Ethernet Ports
The HotPoint 1000R outdoor mesh router has two weatherproof Ethernet ports to provide
Ethernet connectivity to outdoor peripheral devices such as access points or surveillance
cameras. Use of these ports is optional.
Power over Ethernet (PoE)
Ethernet port 1 (center connector) supports PoE for powering the HotPoint 1000R outdoor mesh
router from a peripheral device attached to this connector.
Ethernet port 2 (right connector) supports PoE for powering a peripheral device attached to this
connector.
Connecting Peripheral Devices
1. Remove the protective cap from the Ethernet port you want to use and plug in the Ethernet
cable. Tighten the cable connector to ensure a watertight seal.
2. Attach the other end of the Ethernet cable to the peripheral device.