Installation Manual

2580 Installation Instructions 8
Vehicle front
M8 x 1.25 x 140MM
HEX HEAD BOLT
AXLE
NOTE: Do not forget
to install the Lower Spacer
between the Lower Bracket
and the jounce block.
MAKE
ALIGNMENT
MARKS
LOWER BRACKET INSTALLATION
8
USE YOUR HAND TO CHECK FOR THE
PROPER CLEARANCE AROUND THE AIR
SPRING. IF YOUR HAND DOES NOT FIT
BETWEEN THE AIR SPRING AND OTHER
COMPONENTS, IT WILL RUB!
1
Follow guidelines
below to dry fit
assembly. Make
alignment marks
as shown.
2
Remove assembly
and match align-
ment marks you
made.
3
Fully tighten the
fastener into the
Air Spring.
4
Install the assem-
bly as shown.
DID YOU FULLY TIGHTEN THE FASTENER
ON THE BOTTOM OF THE AIR SPRING?
THIS IS EXTREMELY IMPORTANT!