Installation Manual
riderite.com7
Vehicle front
Insert the Hex Head Bolt through
the aligned holes in the Upper
Bracket and Frame Bracket. Fasten
as shown with the Flange Nuts.
3/8” - 16 x 3 1/2”
HEX HEAD BOLT
3/8” - 16
FLANGE NUT
Vehicle front
Align holes in Lower Spacer
to Lower bracket and jounce block.
Lower Spacer goes between the
Lower Bracket and the jounce
block on the vehicle.
LOWER SPACER
AXLE
NOTE: The curved part of
the Lower Bracket orients
to the rear of the vehicle.
INSTALL UPPER BRACKET TO FRAME BRACKET
PREP LOWER SPACER FOR LOWER BRACKET INSTALLATION
6
7
x 2x 2










