Installation Manual

2580 Installation Instructions 6
Vehicle front
FRAME BRACKET
FRAME BRACKET
VIEWED FROM BELOW
M10 x 1.5 x 30MM
FLAT HEAD BOLTS
Fasten the Frame Bracket using
existing jounce bumper bolt hole
locations on vehicle.
Bracket end with
greatest distance
goes to rear
of vehicle.
Vehicle front
Least
distance
Greatest
distance
AIR SPRING ASSEMBLY
Taller side of Upper Bracket
goes to the outside of the
vehicle frame.
Vehicle front
FRAME BRACKET
Slide the Air Spring Assembly
into place and align the bolt
holes in the Frame Bracket with
the bolt holes in the Upper Bracket.
INSTALL THE FRAME BRACKET
FIT AIR ASSEMBLY INTO PLACE ON FRAME BRACKET
4
5
FOR EASIER ACCESS, YOU MAY WANT TO
PRE-RUN THE AIR LINE TUBE TO THE AIR
FITTING AT THIS STAGE.
x 2