Owner's Manual

Remote Control &Touch Panel Operation
BUTTON FUNCTION ACTION & INDICATION
POWER
ON: Enables control panel functions
and remote control. Turns on flame
effect.
OFF: Disables control panel functions
and remote control. Turns off flame
effect.
1. Press once. Indicator light turns on.
Power turns on. All functions
enabled.
2. Press again. Flame effect turns off.
Unit goes to standby. All functions
turn off.
TIMER
TIMER button: Controls timer settings
to turn off fireplace at selected time.
Settings range from 30 minutes to 8 hours.
1.
Press once. Indicator light turns
on. Timer is set to 30 minutes.
2. Press again until desired setting
is reached. Indicator lights show
setting.
FLAME
FLAME button: Makes flame
effect dimmer and brighter.
NOTE: Flame effect stays on until
power button is turned off. Flame effect
must be on for the heater to turn on.
1. Press once. Flame brightness
effect changes.
2. Press again
until desired setting
is reached.
COLOR
COLOR button: Makes the color of
the flames change.
NOTE: Color effect stays on until
power button is turned off. Color
flame effect must be on for heater to
turn on.
NOTE: This fireplace includes
memory function for flames.
1.
Press once. Flame color effect
changes.
2. Press again until desired setting
is reached.
HEATER
HEATER button: Turns heater on and off.
NOTE: The heater only works when the
flame effect is on. If the flame effect is
off, the heater will not turn on.
NOTE: To prevent overheating, the
heater fan will blow cool air for 8-10
seconds before the heater turns on, and
after the heater turns off.
1.
Press once. Indicator lights up.
Fan blows cool air for 10 seconds.
750W heater turns on and b
lows warm
air.
2.
Press again. Indicator lights up.
1500W heater turns on and blows hot
air.
3. Press again. Heaters turn off.
The fan blows cool air for 10 seconds
to allow heater to cool down, then
turns off.
15