Instructions / Assembly

Tray Pad Assembly Instrucons

Parts Included: frame support, L tube, table tray, 1 nut and 1

bolt, 1 self tapping screw.

Step One: Insert L tube into frame support. Line up larger bolt

hole and make sure that smaller holes closer to frame are also

lined on boom of tube. Insert bolt into larger hole and hand

ghten with nut.

Step Two: Insert self tapping screw into smaller hole. Use drill

to ghten

Step Three: Install table tray on top of frame.

Step Four: Insert L tube into PNP re pit bracket. NOTE: may

cut the length of tube to desired height.

PAGE 1
Tray Pad Assembly Instructions Parts Included: frame support, L tube, table tray, 1 nut and 1 bolt, 1 self tapping screw. Step One: Insert L tube into frame support. Line up larger bolt hole and make sure that smaller holes closer to frame are also lined on bottom of tube. Insert bolt into larger hole and hand tighten with nut. Step Two: Insert self tapping screw into smaller hole. Use drill to tighten Step Three: Install table tray on top of frame. Step Four: Insert L tube into PNP fire pit bracket.