User manual

9
POWER PACK
DEACTIVATION
YourCO-9D isportable,making itideal for
takingwithyouonholiday.Youwillneedto
deactivate your detector when travelling or
even when storing e.g. when decorating.
Fitting is the reverse of removal. To deactivate
the detector the two ends of the metal clip must
be inserted into the corresponding holes in the
disablingsocketlocatedontheundersideof
the detector (see image). You can ensure that
the product is disabled by pressing the test
button - if there is no sound from the sounder
then the clip has been fitted correctly.
NOTE: If the disabling tab is no longer
available then the clip can be replicated
by opening out a thin metal paper clip into
a U-shape.
OPERATING FEATURES
Your FireAngel detector offers many features
which set it apart from other CO detectors on
themarkettoday.
Standby mode
The alarm can display two views when in
normal standby mode, the current level of CO
or the current room temperature in degrees
centigrade (ºC). When the alarm is showing
the current CO Level you will see something
similar to the following.
FireAngel’s unique digital read out displays
the amount of CO that the sensor is detecting
shown in parts per million (PPM). It is designed
toindicatelevelsfrom10PPMto999PPM.
NOTE: Ambient background levels
between 0PPM and 10PPM will show as
0PPM.
The clip must
remain in the
disabling socket
to keep the power
pack deactivated.