Owner Manual

6
PREPARATION
Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package
contents list and hardware contents as listed on pages 2 and 3 of this manual. If any part is missing or damaged,
do not attempt to assemble this product. Contact customer service for replacement parts.
ESTIMATED ASSEMBLY TIME: 60 minutes
Tools Required for Assembly (NOT included):
Phillips screwdriver w/medium blade
Leak Test Solution
Adjustable wrench - Note: 14mm wrench or socket should fit M8 nut.
NOTE: This heater has an Electronic Ignition and will require the installation of 1 - AAA battery. The battery
should be installed by unscrewing the RED IGNITER BUTTON.
HARDWARE CONTENTS
ASSEMBLY
ASSEMBLY
INCLUDED IN BLISTER PACK
INCLUDED IN PLASTIC BAG
WITH INSTRUCTION MANUAL