Use and Care Manual

Contact us for assistance: [phone] | www.wtliving.com 4
ASSEMBLY
1
On a soft, protected surface, turn the Left Seat
A
on its front to install the
Left Arm
C
using 6 Bolts
G
and 6 Washers H as shown. Once all 6 Bolts
are inserted, tighten all hardware using the Hex
Wrench K.
Repeat to install Right Arm D on the Right Seat B.
Carefully turn both seats back upright.
Hardware Used:
H Bolt (M6x20) x 12
I Washer (M6) x 12
2
To complete the sectional assembly, attach the
assembled Left Seat to the Corner Seat E using
2 Connectors J. Attach the Right Seat to the
Corner Seat in the same manner.
Hardware Used: J Connector x 4
A
C
H
I
K
J
J