Instructions / Assembly

PRO Series Outdoor Patio Heater
One Piece Reflector
Model # 61437
ASSEMBLY
While supporting heater, tilt the Head Assembly and slide the Reflector over
the 3 bolts that extend from the Head Assembly. Use the 3 M8 Wing Nuts
and 3 M8 Washers to secure the Reflector to the Head Assembly of the
heater. Once you have tightened the Wing Nuts, return the heater to an
upright position.
***IMPORTANT NOTICE***
-Do NOT return to place of purchase-
For customer service and warranty issues
contact our Customer Service Center at:
(866)-985-7877 OR
Email: [e-mail]
Customer Service Hours: Mon. – Fri. 9:00 a.m. – 6:00 p.m. (EST)