Instructions / Assembly

WARNING: This appliance requires installation by a competent person.
Proper assembly is the responsibility of the installer.
Step 1
1-1. Attach 3pcs LPG cylinder fixed parts on the
base with 6pcs M6x12mm bolts and M6
1-2. Position the 3 pcs support legs on the base as
shown in the picture to the right.
1-3. Use 3 pcs M8x16mm bolts to affix the support
legs to the base.
Step 2
2-1. Put the post support on top of the 3 pcs support
legs.
2-2. Use 6 pcs M6x30mm bolts and M6 washers and
6mm nuts to connect the post support to the 3
pcs support legs.
2-3. Use 4 pcs. M6X10mm bolts to connect the first
piece of the post assembly to the post support.
ASSEMBLY
- 7 -
washers and 6mm nuts.