OUTDOOR PROPANE FIREPIT Model: 61108 Item number FP-239-BZ FOR YOUR SAFETY If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. If odor continues, immediately call gas supplier. WARNING: For outdoor use only. PLEASE retain this manual for future reference. For customer service, parts or warranty issues: Call our customer service hotline 1-866-985-7877, 9 a.m. – 6 p.m., EST, Monday – Friday or email at cservice@welltraveled.net.
PACKAGE CONTENTS A B C D G E H F J I K L PART A B C D E F G H I J K L 2 DESCRIPTION Table Top Insert Burner Assembly Table Top Piece Angle Iron Back Bracket Post (Left) Front Bracket Post (Left) Back Bracket Post (Right) Front Bracket Post (Right) Side Panel Gas Cylinder Crossbar Bottom Plate Door QUANTITY 1 1 4 4 1 1 1 1 3 1 1 1
HARDWARE CONTENTS AA Screw M4 X 25 Qty. 1 DD CC BB Screw M4 X 8 Qty. 1 M6 nut Qty. 8 Bolt M6 X 30 Qty. 4 GG HH Wrench Qty. 1 Propane Tank Strap Qty. 1 II Lava Rock (One Pack) Qty. 1 EE FF Bolt M6 X 12 Qty. 34 Screw M5 X 8 Qty. 4 JJ Knob Qty. 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. This appliance has been tested to and complies with the CSA INTERNATIONAL REQUIREMENT 4.96 FOR OUTDOOR GAS FOREPLACES.
SAFETY INFORMATION DANGER DANGER • EXPLOSION - FIRE HAZARD • Keep solid combustibles, such as building materials, paper or cardboard, a safe distance away from the fire pit as recommended by the instructions. • Provide adequate clearances around air openings into the combustion chamber. • Never use the fire pit in spaces which do or may contain volatile or airborne combustibles, or products such as gasoline, solvents, paint thinner, dust particles or unknown chemicals.
SAFETY INFORMATION WARNING WARNING California Proposition 65 Combustion by-products produced when using this product contain chemicals known to the State of California to cause cancer, birth defects, and other reproductive harm. • This product is fueled by propane gas. Propane gas is invisible, odorless, and flammable. An odorant is normally added to help detect leaks and can be described as a “rotten egg” smell. The odorant can fade over time so leaking gas is not always detectable by smell alone.
ASSEMBLY INSTRUCTIONS 1. Attach one Knob (JJ) on the Door (L) with 1 - M4x25 Screw (AA). 1 L JJ Hardware Used AA Screw M4 X 25 JJ Knob x1 x1 2.Attach one Angle Iron (D) to one Table Top Piece (C) with 1 - M6x12 bolt (EE). Repeat with the remaining three pieces of Angle Iron and Table Top Pieces. D C Hardware Used EE Bolt M6 X 12 2 x4 3. Line up holes in Table Top Pieces (C) and insert 2 - M6x12 bolts (EE) through holes. Finger tighten with 2 - M6 nuts (DD).
ASSEMBLY INSTRUCTIONS 4. Attach propane tank strap (HH) to bottom plate (K) (see Fig. 4.) 4 K Hardware Used HH Propane tank strap x1 x1 5. Bracket Post Installation. 5-1. Attach four Bracket Posts (E,F,G,H) to the Bottom Plate with 4 - M6x30 bolts (CC) (see Fig. 5-1.) 5-1 E F Hardware Used CC Bolt M6 X 30 x4 5-2. Attach the Gas Cylinder Crossbar (J) to the Bracket Posts with 2 - M6x12 bolts (see Fig. 5-2.
ASSEMBLY INSTRUCTIONS 6. Door Installation. 6-1. Attach Door (L) to Bracket Posts (see Fig. 6-1.) 6-1 L 6-2. Position Door (L) above front Bracket Post (left) and attach the door bracket with 4 - M6x12 bolts (see Fig. 6-2.) 6-2 Hardware Used EE Bolt M6 X 12 x4 7. Side Panel (I ) Installation. 7-1. Attach three Side Panels (I) to the Bracket Posts with 12 - M6x12 bolts (see Fig. 7-1.
ASSEMBLY INSTRUCTIONS 7-2. See Fig. 7-2 for assembled base. 7-2 8. Table Installation 8-1.Line up holes in assembled Table Top with corresponding holes in assembled base. Insert 8 - M6x12 bolts through holes and tighten (see Fig. 8-1.) 8-1 Hardware Used EE Bolt M6 X 12 x8 8-2. The Fire Pit will now look like Fig. 8-2.
ASSEMBLY INSTRUCTIONS 9. Burner Installation 9-1. Line up holes in the Burner Assembly (B) with corresponding holes in the Table Assembly. Insert 4 - M5x8 screws (FF) through holes and tighten (see Fig. 9-1.) h 9-1 B Hardware Used FF Screw M5X8 x4 9-2.Assembled Fire Pit is pictured in Fig. 9-2. 9-2 10-1. Attach one Knob (JJ) to the Table Top Insert (A) with 1 - M4x8 screw (BB). Put Lava Rocks (II) around the Burner. Place the Table Top Insert on top of the assembled Fire Pit.
ASSEMBLY INSTRUCTIONS 10-2. Fire Pit assembly is now complete. 10-2 11. Connect hose and regulator to cylinder. The propane gas and cylinder are sold separately. Use a standard 20 lb. propane cylinder only. Use this heater only with a propane vapor withdrawal supply system. See chapter 5 of the standard for storage and handling of liquefied petroleum gas, ANS/NFPA 58. Your local library or fire department should have this book.
ASSEMBLY INSTRUCTIONS A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your cylinder supplier. Never use a propane cylinder with a damaged valve connection. The propane cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department of Transportation (DOT) or the standard for cylinders, spheres and tubes for transportation of dangerous goods and commission, CAN/CSA-B339.
OPERATION INSTRUCTIONS Leak Test WARNING • Perform all leak tests outdoors. • Extinguish all open flames. • NEVER leak test when smoking. • Do not use the fire pit until all connections have been leak tested and do not leak. Hose / Regulator connection Regulator / Cylinder connection 1. Make 2-3 oz. of leak test solution (one part liquid dishwashing detergent and three parts water). 2. Apply several drops of solution where hose attaches to regulator. 3.
OPERATION INSTRUCTIONS DANGER • CARBON MONOXIDE HAZARD • For outdoor use only. Never use inside house, or other unventilated or enclosed areas. This fire pit consumes air (oxygen). Do not use in unventilated or enclosed areas to avoid endangering your life. Caution: Do not attempt to operate until you have read and understand all General Safety Information in this manual and all assembly is complete and leak checks have been performed. Before Turning Gas Supply ON: 1.
OPERATION INSTRUCTIONS WARNING FOR YOUR SAFETY Be careful when attempting to manually ignite this fire pit. Holding in the control knob for more than 10 seconds before igniting the gas will cause a ball of flame upon ignition. When fire pit is ON: Burner will display tongues of blue and yellow flame. These flames should not be yellow or produce thick black smoke, indicating an obstruction of airflow through the burners. The flame should be blue with straight yellow tops.
OPERATION INSTRUCTIONS 9. Fire pit is away from gasoline or other flammable liquids or vapors. 10. Fire pit is away from windows, air intake openings, sprinklers and other water sources. 11. Fire pit is at least 24 in. on rear and at least 24 in. on sides from combustible materials. 12. Fire pit is on a hard and level surface. 13. There are no signs of spider or insect nests. 14. All burner passages are clear. 15. All air circulation passages are clear. 16.
CARE AND MAINTENANCE Gas odor with extreme yellow tipping of flame. Fire pit does NOT reach the desired temperature. Fire pit glow is excessively uneven. Fire pit makes popping noises. Spiders and insects can nest in burner or orifices. This dangerous condition can damage fire pit and render it unsafe for use. Clean burner holes by using a heavy-duty pipe cleaner. Compressed air may help clear away smaller particles. Carbon deposits may create a fire hazard.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Propane cylinder is frosted over Wait until the propane cylinder warms up and becomes unfrosted Blockage in orifice Clear blockage Control knob is not in ON position Turn control knob to ON Gas pressure is low Turn cylinder valve OFF and replace cylinder Outdoor temperature is less than 40ºF and tank is less than 1/4 full Use a full cylinder Control knob fully ON Check burner and orifices for blockage Carbon build-up Dirt or film on b
Distributed By: Well Traveled Living 716 S 8th Street Amelia Island, FL 32034 Toll Free: 866-WTL-SUPP Web: www.wtliving.com Email: cservice@welltraveled.net 1 YEAR LIMITED WARRANTY – Customers in the Continental US All components are warranted for a period of 1 year after date of purchase by the original owner against defects in materials and workmanship under normal use.
