Instructions / Assembly

- 10 -

10. Connect the hose and regulator to the LP cylinder. The LP cylinder is

sold separately. Use a standard 20 lb. propane cylinder only. Screw

Regulator (D) onto Gas Hose (C). Do not cross thread. Hand tighten securely.

Attach Regulator (D) to valve on LP cylinder and hand tighten securely.

Place LP tank onto base of heater and close Tank Housing Door (I).

NOTE: Use this heater only with a propane

vapor withdrawal supply system. See chapter 5 of

the standard for storage and handling of liquefied

petroleum gas, ANSI/NFPA 58. Your local library or

fire department should have this book.

ASSEMBLY