Instructions / Assembly

This appliance MUST be grounded.

* When using outdoors, we recommend using a certified GFI (Ground Fault Interrupt)

outlet to protect against electrical shock.

* All installations must be in accordance with I.E.E. safety regulations or the equivalent.

* Avoid the use of an extension cord with this appliance.

* Do not place any objects such as furniture, papers, clothing or curtains closer than 3 feet

to the front and sides of the heater.

PARTS LIST

1- IR Head unit w/Protective Shield with:

* Tilt Switch (safety cut off)

* On/Off Switch (PULL for ON, PUSH for OFF)

* Angle Adjustment Bar

* 1500 Watt quartz halogen bulb

* Swivel Bracket

* 15.5 foot, 14 AWG grounded electrical cord

2 – Mounting Bracket – attaches head unit to

telescopic pole

3 – Upper support tube section for telescopic body

4 – Telescopic Body – includes 2 sections (4-1 and

4-2) with 2 easy release clamp collars (4-3)

to allow for easy adjustment

5 – Adjustable table

6 – Top cover finishing piece

7 – Rounded end bracket

8 – L-shaped bracket

9 – Support Collar for telescopic body

10 – Base assembly with wheel assembly

11 – Protective vinyl cover (for use ONLY when

heater has completely cooled)

ALSO INCLUDED (not pictured):

Hardware packet :

Letter Name Quantity

M6*12 Oval Head Screw 24 pieces

M4 Flat Washer 2 pieces

M4*10 Round Head Screw 3 pieces

M8*22 Hexagon Screw 4 pieces

M8 Flat Washer 4 pieces

M6*20 Oval Head Screw 2 pieces

M8*16 Hexagon Screw 3 pieces

CAUTION!